Weidmuller VPU AC II 1+1 R 300/50 2591070000
Protetores Sobretensão Weidmuller VPU AC II 1+1 R 300/50 2591070000
Version
Surge voltage arrester, Low voltage, Surge protection, with remote contact, Single-phase, TN, TN-S, TT, IT with N, IT without N
Order No.
2591070000
Type
VPU AC II 1+1 R 300/50
GTIN (EAN)
4050118599862
Qty.
1 pc(s).
Depth
68 mm
Depth (inches)
2.677 inch
Depth including DIN rail
76 mm
Height
104.5 mm
Height (inches)
4.114 inch
Width
36 mm
Width (inches)
1.417 inch
Net weight
257 g
Storage temperature
-40 °C…85 °C
Operating temperature
-40 °C…85 °C
Operating temperature, min.
-40 °C
Operating temperature, max.
85 °C
Humidity
5 – 95% rel. humidity
Ambient temperature (operational), max.
85 °C
Rated Voltage UN
240 V
VPR (N-PE)
1,000 V
MCOV (L-PE)
300 V
MCOV (N-PE)
305 V
SCCR
150 kA
In
20 kA
Category
SPD TYPE 1CA
Ambient temperature (operational), min.
-40 °C
Certificate No. (cURus)
E354261
MODE
all modes
VPR (L-N)
900 V
VPR (L-PE)
1,000 V
Voltage type
AC
UL Energy Networks
Split-Phase
Colour
black, orange, blue
Design
Installation housing; 2TE, Insta IP 20
Operating altitude
≤ 4000 m
Optical function display
green = OK; red = arrester is defective – replace
Protection degree
IP20 in installed state
Rail
TS 35
Segment
Power distribution
UL 94 flammability rating
V-0
Version
Surge protection, with remote contact
Combined pulse UOC
6 kV
Discharge current Imax (8/20µs) N-PE
65 kA
Discharge current Imax (8/20µs) wire-PE
50 kA
Discharge current In (8/20µs) N-PE
40 kA
Discharge current In (8/20µs) wire-PE
20 kA
Energy coordination (≤10 m)
Type II, Type III
Follow-on current extinguishing capability Ifi
Follow current need not be taken into account
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse
No Fuse neccessary ≤315 A gG, 250 A gG @50 kA Isccr, 315 A gG @25 kA Isccr
Leakage current at Un
1 µA
Low voltage network
Single-phase, TN, TN-S, TT, IT with N, IT without N
Mains voltage
230 V / 400 V
Max. continuous voltage, Uc (AC)
300 V
Max. continuous voltage, Uc (N-PE)
305 V
Number of poles
2
Protection level Up at IN (L/N-PE)
≤ 1.5 kV
Protection level Up at IN (N-PE)
≤ 1.5 kV
Rated voltage (AC)
230 V
Requirements category acc. to IEC 61643-11
Type II/III
Requirements class, acc. to EN 61643-11
T2, T3
Response time
≤ 25 ns, ≤ 100 ns
SPD type
T2, T3
Short-circuit current rating ISCCR
50 kA
Signalling contact
250 V 1A 1CO
Standards
IEC61643-11, EN61643-11, UL 1449
Temporary surge voltage (over-voltage) – TOV
337 V
Voltage type
AC
Stripping length
15 mm
Wire connection method
Screw connection
Type of connection
Screw connection
Stripping length, rated connection
15 mm
Tightening torque, min.
2 Nm
Tightening torque, max.
4.5 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
4 mm²
Clamping range, max.
35 mm²
Wire cross-section, solid, min.
1.5 mm²
Wire cross-section, solid, max.
16 mm²
Wire connection cross section, finely stranded, min.
1.5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection cross-section, stranded, max.
35 mm²
Categoria: Desc. de Sobretensão EFAPEL
Siga-nos nas redes sociais:
Não há avaliações ainda.